Close
(0) items
You have no items in your shopping cart.
All Categories
    Filters
    Preferences
    Search
    Manufacturer: Rode

    Copy of Rode SC6-L Mobile Interview Kit with Interface & 2 SmartLav+ Microphones

    $240.00
    $299.00
    Rode SC6-L Mobile Interview Kit with Interface & 2 SmartLav+ Microphones
    Availability: 3 in stock
    Fast shipping
    Delivery date: 1-3 days

     

    We are the authorized RODE Retailer in Singapore with official RODE warranty.



    1 Year Rode Warranty

     

     

    Highlights:

    Includes SC6-L Mobile Interface
    2 x 3.5mm TRRS Inputs for Microphones
    1 x 3.5mm Headphone Out for Monitoring
    Lightning Connector for iOS Devices
    24-Bit / 48 kHz Recording
    Includes 2 RODE SmartLav+ Microphones
    Includes 2 Lav Clips and 2 Windshields
    Includes 2 Storage Pouch for RODE Smartlav+


    Overview:

    Bundled together for the convenience of iOS users, the Rode SC6-L Mobile Interview Kit includes the Rode SC6-L Mobile Interface, two Rode SmartLav+ lapel microphones, and accessories such as storage pouches, mic clips, and windshields.

    The Rode SC6-L interface facilitates the recording of 24-bit / 48 kHz broadcast-quality audio, giving you two TRRS inputs for the microphones, a 3.5mm headphone jack, and a lightning connector for your iOS device. The microphones record two interview subjects at a time, and the accessories allow you to affix the mics, fight against vocal plosives, and store the mics for later use.

    With the Rode SC6-L Mobile Interview Kit, you'll have everything you need to record audio from two interview subjects straight into your iOS device, doing so at broadcast quality.


    Specification:

    Rode SC6-L

    Frequency Range: 20 Hz to 20 kHz
    Connections: 2 x 3.5 mm TRRS microphone inputs
                        1 x 3.5 mm headphone output
                        1 x Lightning connector
    I/O: 2x2, simultaneous
    Bit Depth: 24-bit
    Sample Rates: 44.1 / 48 kHz
    Power: Bus-powered
    Material: PC and ABS plastic
    Dimensions: 0.8 x 1.6 x 0.4" / 20.2 x 40.0 x 11.0 mm
    Weight: 0.6 oz / 16.0 g

    Rode Smartlav+

    Acoustic Principle: Pressure gradient
    Active Electronics: JFET
    Capsule: 0.10" / 2.54 mm
    Polar Pattern: Omnidirectional
    Address Type: End
    Frequency Range: 60 Hz to 18 kHz
    Output Impedance: 3 kOhms Typical
    Signal to Noise Ratio: 67 dB
    Maximum SPL: 110 dB SPL (@ 1 kHz, 1% THD into 1 kOhm load)
    Maximum Output Level: 189.0 dBu (@ 1 kHz, 1% THD into 1 kOhm load)
    Sensitivity: -35 dB (17.8 mV @ 94 dB SPL)
    Equivalent Noise Level: 27 dB-A
    Connector: TRRS
    Maximum Output: 189 mV
    Dynamic Range: 83 dB typical
    Dimensions: 46.5 x 0.18 x 0.18" / 1180 x 4.5 x 4.5 mm, mic and cable
    Weight: 0.211 oz / 6.00 g


    Items Included:

    1 x Rode SC6-L
    2 x Rode Smartlav+
    2 x Storage Pouch for Smartlav+
    2 x Foam Pop Shield
    2 x Mic Clip

     

    We are the authorized RODE Retailer in Singapore with official RODE warranty.



    1 Year Rode Warranty

     

     

    Highlights:

    Includes SC6-L Mobile Interface
    2 x 3.5mm TRRS Inputs for Microphones
    1 x 3.5mm Headphone Out for Monitoring
    Lightning Connector for iOS Devices
    24-Bit / 48 kHz Recording
    Includes 2 RODE SmartLav+ Microphones
    Includes 2 Lav Clips and 2 Windshields
    Includes 2 Storage Pouch for RODE Smartlav+


    Overview:

    Bundled together for the convenience of iOS users, the Rode SC6-L Mobile Interview Kit includes the Rode SC6-L Mobile Interface, two Rode SmartLav+ lapel microphones, and accessories such as storage pouches, mic clips, and windshields.

    The Rode SC6-L interface facilitates the recording of 24-bit / 48 kHz broadcast-quality audio, giving you two TRRS inputs for the microphones, a 3.5mm headphone jack, and a lightning connector for your iOS device. The microphones record two interview subjects at a time, and the accessories allow you to affix the mics, fight against vocal plosives, and store the mics for later use.

    With the Rode SC6-L Mobile Interview Kit, you'll have everything you need to record audio from two interview subjects straight into your iOS device, doing so at broadcast quality.


    Specification:

    Rode SC6-L

    Frequency Range: 20 Hz to 20 kHz
    Connections: 2 x 3.5 mm TRRS microphone inputs
                        1 x 3.5 mm headphone output
                        1 x Lightning connector
    I/O: 2x2, simultaneous
    Bit Depth: 24-bit
    Sample Rates: 44.1 / 48 kHz
    Power: Bus-powered
    Material: PC and ABS plastic
    Dimensions: 0.8 x 1.6 x 0.4" / 20.2 x 40.0 x 11.0 mm
    Weight: 0.6 oz / 16.0 g

    Rode Smartlav+

    Acoustic Principle: Pressure gradient
    Active Electronics: JFET
    Capsule: 0.10" / 2.54 mm
    Polar Pattern: Omnidirectional
    Address Type: End
    Frequency Range: 60 Hz to 18 kHz
    Output Impedance: 3 kOhms Typical
    Signal to Noise Ratio: 67 dB
    Maximum SPL: 110 dB SPL (@ 1 kHz, 1% THD into 1 kOhm load)
    Maximum Output Level: 189.0 dBu (@ 1 kHz, 1% THD into 1 kOhm load)
    Sensitivity: -35 dB (17.8 mV @ 94 dB SPL)
    Equivalent Noise Level: 27 dB-A
    Connector: TRRS
    Maximum Output: 189 mV
    Dynamic Range: 83 dB typical
    Dimensions: 46.5 x 0.18 x 0.18" / 1180 x 4.5 x 4.5 mm, mic and cable
    Weight: 0.211 oz / 6.00 g


    Items Included:

    1 x Rode SC6-L
    2 x Rode Smartlav+
    2 x Storage Pouch for Smartlav+
    2 x Foam Pop Shield
    2 x Mic Clip